Tình trạng sản phẩm: mới

MITSUBISHI F9GT-RHCAB5-150 Product information and technical parameters:
Name: Cable for connecting hand held RH GOT type and PLC
Model: F9GT-RHCAB5-150
Connecting cable for handheld RH GOT and PLC.
Cable length: 1.5 meters.
Application: RS-232C connection (Q series (except for QnU).

Danh mục:

Mô tả

Protective film for 10.4 inch screen.
Transparent, 5.
Applicable model: GT16. Cable length: 20m.
For QnA/ACPU/ motion controller CPU (A Series) /FXCPU. Connection between (D-SUB25 pin connector) and GOT.
For the connection between FA-CNV*CBL and GOT.
Connector for serial communication unit and GOT.
For the connection between AJ65BT-G4-S3 and GOT MITSUBISHI F9GT-RHCAB5-150.
Applicable models: GT16, GT15, GT11, HandyGOT, GT10, GT27, GT25, GT23,, GT21 F9GT-RHCAB5-150 A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle) MITSUBISHI F9GT-RHCAB5-150.
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system MITSUBISHI F9GT-RHCAB5-150.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly F9GT-RHCAB5-150. Cable length: 20m.
For connection between FXCPU (MINI-DIN8 pin connector) and GOT.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT.
Applicablee models: GT10, GT21 F9GT-RHCAB5-150. For QCPU (Q) / transport controller CPU (Q Series) the bus (2 channel) thin type unit.
Applicable models: GT15, GT16, GT27, GT25.

Thông tin bổ sung




GOT-F900 series touch screen

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “F9GT-RHCAB5-150”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *