Mô tả
1 phase 24VDC/240W UNO-PS/1AC/24DC/240W
Input data
| Nominal input voltage range |
100 V AC … 240 V AC |
| Input voltage range |
85 V AC … 264 V AC (< 95 V AC Derating 1 %/V) |
| Frequency range (fN) |
50 Hz … 60 Hz ±5 Hz |
| Current consumption |
2.69 A (100 V AC) |
|
1.08 A (240 V AC) |
| Nominal power consumption |
260 VA |
| Inrush current |
< 80 A (typical) |
| Mains buffering time |
typ. 10 ms (120 V AC) |
|
typ. 10 ms (230 V AC) |
| Input fuse |
5 A (slow-blow, internal) |
| Recommended breaker for input protection |
6 A … 16 A (Characteristics B, C, D, K) |
| Power factor (cos phi) |
0.99 |
| Type of protection |
Transient surge protection |
| Protective circuit/component |
Varistor |
Back to top
Output data
| Nominal output voltage |
24 V DC ±1 % |
| Setting range of the output voltage (USet) |
24 V DC … 28 V DC ±1 % |
| Nominal output current (IN) |
10 A (-25 °C … 55 °C) |
| Derating |
55 °C … 70 °C (2.5%/K) |
| Connection in parallel |
Yes, for redundancy and increased capacity |
| Connection in series |
No |
| Feedback voltage resistance |
< 35 V DC |
| Protection against overvoltage at the output (OVP) |
≤ 35 V DC |
| Control deviation |
change in load, static 10 % … 90 % |
|
< 2 % (change in load, dynamic 10 % … 90 %) |
|
< 0.1 % (change in input voltage ±10 %) |
| Residual ripple |
< 50 mVPP (with nominal values) |
| Output power |
240 W |
| Typical response time |
< 1 s |
| Maximum power dissipation in no-load condition |
< 1.1 W |
| Power loss nominal load max. |
< 18.8 W |
Đánh giá
Chưa có đánh giá nào.