Mô tả
3 phase 24DC/40A TRIO-PS/3AC/24DC/40
Input data
| Nominal input voltage range |
3x 400 V AC … 500 V AC |
| Input voltage range |
3x 320 V AC … 575 V AC |
|
2x 360 V AC … 575 V AC (for 2-phase operation) |
| AC frequency range |
45 Hz … 65 Hz |
| Discharge current to PE |
< 3.5 mA |
| Current consumption |
3x 2 A (400 V AC) |
|
3x 1.6 A (480 V AC) |
| Nominal power consumption |
1387 VA |
| Inrush current |
< 20 A |
| Mains buffering time |
> 16 ms (400 V AC) |
|
> 20 ms (480 V AC) |
| Recommended breaker for input protection |
6 A … 16 A (Characteristics B, C, D, K) |
| Power factor (cos phi) |
0.76 |
| Type of protection |
Transient surge protection |
| Protective circuit/component |
Varistor |
Back to top
Output data
| Nominal output voltage |
24 V DC ±1 % |
| Setting range of the output voltage (USet) |
22.5 V DC … 29.5 V DC (> 24 V DC, constant capacity restricted) |
| Nominal output current (IN) |
40 A (-25 °C … 55 °C) |
| Derating |
55 °C … 70 °C (2.5%/K) |
| Connection in parallel |
Yes, for redundancy and increased capacity |
| Connection in series |
yes |
| Feedback voltage resistance |
35 V DC |
| Protection against overvoltage at the output (OVP) |
< 35 V DC |
| Max. capacitive load |
unlimited |
| Active current limitation |
Approx. 48 A |
| Control deviation |
< 1 % (change in load, static 10 % … 90 %) |
|
< 2 % (change in load, dynamic 10 % … 90 %) |
|
< 0.1 % (change in input voltage ±10 %) |
| Residual ripple |
< 20 mVPP |
| Output power |
960 W |
| Typical response time |
< 1 s |
| Peak switching voltages nominal load |
< 40 mVPP |
| Maximum power dissipation in no-load condition |
16 W |
| Power loss nominal load max. |
91 W |
Đánh giá
Chưa có đánh giá nào.