Mô tả
1 phase, output: 48 V DC/10 A
Input data
| Nominal input voltage range | 100 V AC … 240 V AC |
|---|---|
| 110 V DC … 250 V DC | |
| Input voltage range | 100 V AC … 240 V AC -15 % … +10 % |
| 99 V DC … 275 V DC | |
| Dielectric strength maximum | ≤ 300 V AC 15 s |
| AC frequency range | 50 Hz … 60 Hz ±10 % |
| Discharge current to PE | < 3.5 mA |
| Current consumption | 5.6 A (100 V AC) |
| 5.4 A (120 V AC) | |
| 2.6 A (230 V AC) | |
| 2.4 A (240 V AC) | |
| Nominal power consumption | 604.7 VA |
| Inrush current | 20 A (at 25 °C) |
| Mains buffering time | typ. 10 ms (120 V AC) |
| typ. 15 ms (230 V AC) | |
| Input fuse | 10 A (internal (device protection)) |
| Recommended breaker for input protection | 10 A … 16 A (Characteristics B, C, D, K) |
| Power factor (cos phi) | 0.85 |
| Type of protection | Transient surge protection |
| Protective circuit/component | Varistor |
Output data
| Nominal output voltage | 48 V DC ±1 % |
|---|---|
| Setting range of the output voltage (USet) | 36 V DC … 55 V DC (> 48 V DC, constant capacity restricted) |
| Nominal output current (IN) | 10 A |
| Dynamic Boost (IDyn.Boost) | 15 A (5 s) |
| Derating | > 60 °C … 70 °C (2.5%/K) |
| Connection in parallel | Yes, for redundancy and increased capacity |
| Connection in series | yes |
| Feedback voltage resistance | ≤ 60 V DC |
| Protection against overvoltage at the output (OVP) | ≤ 60 V DC |
| Control deviation | < 1 % (change in load, static 10 % … 90 %) |
| < 3 % (Dynamic load change 10 % … 90 %, 10 Hz) | |
| < 0.1 % (change in input voltage ±10 %) | |
| Residual ripple | < 50 mVPP (with nominal values) |
| Output power | 480 W |
| Typical response time | < 1 s |
| Peak switching voltages nominal load | < 1000 mVPP |
| Maximum power dissipation in no-load condition | < 5.7 W (230 V) |
| Power loss nominal load max. | < 44 W |
Đánh giá
Chưa có đánh giá nào.