Mô tả
1-phase, output: 24 V DC/20 A
Input data
| Nominal input voltage range |
100 V AC … 240 V AC |
|
110 V DC … 250 V DC |
| Input voltage range |
100 V AC … 240 V AC -15 % … +10 % |
|
110 V DC … 250 V DC -18 % … +40 % |
| Dielectric strength maximum |
300 V AC 60 s |
| AC frequency range |
50 Hz … 60 Hz -10 % … +10 % |
| Frequency range (fN) |
50 Hz … 60 Hz -10 % … +10 % |
| Discharge current to PE |
< 3.5 mA |
| Current consumption |
6.8 A (100 V AC) |
|
5.5 A (120 V AC) |
|
2.8 A (230 V AC) |
|
2.7 A (240 V AC) |
| Nominal power consumption |
520 VA |
| Inrush current |
typ. 11 A (at 25 °C) |
| Mains buffering time |
typ. 28 ms (120 V AC) |
|
typ. 29 ms (230 V AC) |
| Input fuse |
12 A (slow-blow, internal) |
| Recommended breaker for input protection |
10 A … 16 A (Characteristic B, C, D, K or comparable) |
| Power factor (cos phi) |
0.98 |
| Type of protection |
Transient surge protection |
| Protective circuit/component |
Varistor, gas-filled surge arrester |
Back to top
Output data
| Nominal output voltage |
24 V DC |
| Setting range of the output voltage (USet) |
24 V DC … 29.5 V DC (constant capacity) |
| Nominal output current (IN) |
20 A |
| Static Boost (IStat.Boost) |
25 A |
| Dynamic Boost (IDyn.Boost) |
30 A (5 s) |
| Selective Fuse Breaking (ISFB) |
120 A (15 ms) |
| Derating |
> 60 °C (2.5%/K) |
| Connection in parallel |
Yes, for redundancy and increased capacity |
| Connection in series |
yes |
| Feedback voltage resistance |
≤ 35 V DC |
| Protection against overvoltage at the output (OVP) |
≤ 32 V DC |
| Control deviation |
< 0.5 % (Static load change 10 % … 90 %) |
|
< 4 % (Dynamic load change 10 % … 90 %, (10 Hz)) |
|
< 0.25 % (change in input voltage ±10 %) |
| Residual ripple |
< 50 mVPP (with nominal values) |
| Output power |
480 W |
| Typical response time |
300 ms (from SLEEP MODE) |
| Maximum power dissipation in no-load condition |
< 5 W (120 V AC) |
|
< 5 W (230 V AC) |
| Power loss nominal load max. |
< 40 W (120 V AC) |
|
< 32 W (230 V AC) |
Đánh giá
Chưa có đánh giá nào.