Mô tả
| Categorise | Incremental Shaft model | |
| Diameter | 40 mm dia. | |
| Power supply voltage | 12 to 24 VDC (-10% to +15%) Ripple (p-p) 5% max. | |
| Current consumption | 100 mA max. | |
| Resolution | 1000 P/R | |
| Inrush current | Approx. 9 A (0.3 ms) | |
| Output phases | A, B and Z | |
| Control output | Output type | PNP open collector |
| Load power supply voltage | 30 VDC max. | |
| Load current | 35 mA max. (Source current) | |
| Residual voltage | 0.4 V max. (at source current 35 mA) | |
| Starting positional point | Supported | |
| Max. response frequency | 50 kHz | |
| Phase difference on output | 90±45 °between A and B (1/4 T ± 1/8 T) | |
| Rise and fall times of output | 1 µs max. (Cable length: 2 m max., Sink current 10 mA) | |
| Starting torque | Room temperature: 0.98 mN.m max. | |
| Moment of inertia | 1 x 10**-6 kg.m**2 max. | |
| Shaft loading | Radial: 30 N Thrust: 20 N |
|
| Max. permissible rotation | 6000 r/min | |
| Protective circuit | Output short-cut protection Power supply reverse polarity protection |
|
Đánh giá
Chưa có đánh giá nào.