| Applicable mode |
Unwinding control, Rewinding control |
| Applicable load |
5 ~ 2,000Kg |
| Rated output |
DC 0 ~ ± 10V (5mA max) · DC 0 ~ 24V (4A max) |
| Power |
AC 1∮, 220V, 50/60 Hz |
| Surge current |
3A |
| Power consumption |
150VA |
| Ambient temperature |
0°C ~40°C |
| Ambient humidity |
80% RH |
| Vibration test |
Sweep freq. 10-55Hz, Displacement acceleration
0.5mm – 0.5G max. |
| Withstand voltage |
1500V @ 1 minute |
| Grounding way |
The third class grounding |
| Environment requirement |
Not allowed corrosive gases, dust and rain |
| Weight |
~ 3Kg |
| Display |
LED & LCD |
| Setting method |
Keypad |
|
| Load Cell Specification |
LMS series high-precision tension detector
PDSA series wide-angle tension detector |
| External signal input |
Diameter detection (pulse for counting length), 3.0KHz max., input impedance 2KΩ
Line speed, DC 0-10V, input impedance 20 KΩ
Tension setting, DC 0-10V, input impedance 20 KΩ
Taping tension setting, DC 0-10V, input impedance 20 KΩ
Other detector, DC 0-10V, input impedance 20 KΩ
Rewinding speed or diameter signal, select one, DC 0-10V, input impedance 20 KΩ |
| Contact input |
Accelerated compensation, input impedance 6.6 KΩ
Decelerated compensation, input impedance 6.6 KΩ
Roller switching, input impedance 6.6 KΩ
Retention force, input impedance 6.6 KΩ
Tension setting selection (manual or automatic) , input impedance 6.6 KΩ
OUTPUT ON/OFF, input impedance 6.6 KΩ
Abnormal status RESET, input impedance 6.6 KΩ
Diameter RESET, input impedance 6.6 KΩ
RUN (START), input impedance 6.6 KΩ |
| Contact output |
Low-tension, High-tension or Abnormal Alarm;
2 sets of output AC220V 1.0A |
| Control output |
Magnetic powder brake (2 sets); DC 0~24V 4A (control output) and DC 0~24V 2A (roller-switching output)
Speed signal, DC 0~10V 5mA
New roller’s torque signal, DC 0 – 10V 5mA
Torque signal, DC 0 ~10V or 4~20mA
Tension-value signal, DC 0~10V 5mA |
| Communication |
RS485 MODBUS RTU |
|
Đánh giá
Chưa có đánh giá nào.