1756-OW16I

Mô tả

• Outputs: 16 N.O. individually isolated
• Pilot duty: C300/R150
• Operating voltage range:
5…125V DC
10…240V AC
• Output voltage range (load dependent):
1 A @ 5 30V DC
0.5 A @ 48V DC
0.22 A @ 125V DC
1.5A @ 120V AC 50/60 Hz
0.75A @ 240V AC 50/60 Hz
• Output delay time:
Off to On: 10 ms max
On to Off: 10 ms max
• Current draw @ 5.1V: 150 mA
• Current draw @ 24V: 150 mA
• Total backplane power: 4.4 W
• Power dissipation, max: 4.5 W @ 60 °C (140 °F)
• Thermal dissipation: 15.35 BTU/hr
• Off-state leakage current per point, max: 1.5 mA per point
• On-state voltage drop, max: 400 mV DC @ 1 A
• Minimum load current: 10 mA per point
• Current per module, max: 8 A @ 60 °C (140 °F)
• Initial contact resistance, max: 100 m @ 6V 1 A
• Switching frequency, max: 1 operation/3 s (0.3 Hz at rated load)
• Bounce time, mean: 1.2 ms
• Expected contact life:
300 K cycles resistive
100 K cycles inductive
• Scheduled outputs: Synchronization within 16.7 s max, reference to the Coordinated System Time
• States in Fault mode per point: Hold last state, On or Off (Off is default)
• States in Program mode per point: Hold last state, On or Off (Off is default)
• Isolation voltage:
250V (continuous), basic insulation type, outputs-to-backplane, and output-to-output
Routine tested @ 1350V AC for 2 s
• Module keying: Electronic, software configurable
• Fusing: Not protected. A fused IF M can be used to protect outputs.
• RTB keying: User-defined mechanical
• Slot width: 1
• Wire category: 1¹
• North American temperature code: T4
• Enclosure type: None (open-style)