Mô tả
Bộ nguồn, 1 pha, 24 VDC/20A TRIO-PS/1AC/24DC/ 20A
Input data
| Nominal input voltage range |
100 V AC … 240 V AC |
| Input voltage range |
85 V AC … 264 V AC (Derating < 90 V AC: 2,5 %/V) |
| Dielectric strength maximum |
300 V AC |
| AC frequency range |
45 Hz … 65 Hz |
| Discharge current to PE |
< 3.5 mA |
| Current consumption |
4.6 A (120 V AC) |
|
2.4 A (230 V AC) |
| Nominal power consumption |
533 VA |
| Inrush current |
< 15 A |
| Mains buffering time |
> 13 ms (120 V AC) |
|
> 13 ms (230 V AC) |
| Input fuse |
10 A (slow-blow, internal) |
| Recommended breaker for input protection |
16 A (Characteristics B, C, D, K) |
| Power factor (cos phi) |
0.99 |
| Type of protection |
Transient surge protection |
| Protective circuit/component |
Varistor |
Back to top
Output data
| Nominal output voltage |
24 V DC ±1 % |
| Setting range of the output voltage (USet) |
22.5 V DC … 29.5 V DC (> 24 V DC, constant capacity restricted) |
| Nominal output current (IN) |
20 A (UOUT = 24 V DC) |
| Derating |
55 °C … 70 °C (2.5%/K) |
| Connection in parallel |
Yes, for redundancy and increased capacity |
| Connection in series |
yes |
| Feedback voltage resistance |
35 V DC |
| Protection against overvoltage at the output (OVP) |
< 35 V DC |
| Max. capacitive load |
unlimited |
| Active current limitation |
Approx. 25 A (for short-circuit) |
| Control deviation |
< 1 % (change in load, static 10 % … 90 %) |
|
< 2 % (change in load, dynamic 10 % … 90 %) |
|
< 0.1 % (change in input voltage ±10 %) |
| Residual ripple |
< 10 mVPP |
| Output power |
480 W |
| Typical response time |
< 1 s |
| Peak switching voltages nominal load |
< 80 mVPP |
| Maximum power dissipation in no-load condition |
4 W |
| Power loss nominal load max. |
46 W |
Đánh giá
Chưa có đánh giá nào.