Mô tả
1-phase, output: 24 V DC/5 A
Input data
Nominal input voltage range |
100 V AC … 240 V AC |
|
110 V DC … 250 V DC |
Input voltage range |
100 V AC … 240 V AC -15 % … +10 % |
|
110 V DC … 250 V DC -18 % … +40 % |
Dielectric strength maximum |
300 V AC 60 s |
AC frequency range |
50 Hz … 60 Hz -10 % … +10 % |
Frequency range (fN) |
50 Hz … 60 Hz -10 % … +10 % |
Discharge current to PE |
< 3.5 mA |
Current consumption |
1.7 A (100 V AC) |
|
1.5 A (120 V AC) |
|
0.9 A (230 V AC) |
|
0.8 A (240 V AC) |
Nominal power consumption |
163 VA |
Inrush current |
typ. 14 A (at 25 °C) |
Mains buffering time |
typ. 28 ms (120 V AC) |
|
typ. 38 ms (230 V AC) |
Input fuse |
6.3 A (slow-blow, internal) |
Recommended breaker for input protection |
6 A … 16 A (Characteristic B, C, D, K or comparable) |
Power factor (cos phi) |
0.82 |
Type of protection |
Transient surge protection |
Protective circuit/component |
Varistor, gas-filled surge arrester |
Back to top
Output data
Nominal output voltage |
24 V DC |
Setting range of the output voltage (USet) |
24 V DC … 29.5 V DC (constant capacity) |
Nominal output current (IN) |
5 A |
Static Boost (IStat.Boost) |
6.25 A |
Dynamic Boost (IDyn.Boost) |
10 A (≤ 60 °C (5 s)) |
Selective Fuse Breaking (ISFB) |
30 A (15 ms) |
Derating |
> 60 °C (2.5%/K) |
Connection in parallel |
Yes, for redundancy and increased capacity |
Connection in series |
yes |
Feedback voltage resistance |
≤ 35 V DC |
Protection against overvoltage at the output (OVP) |
≤ 32 V DC |
Control deviation |
< 0.5 % (Static load change 10 % … 90 %) |
|
< 4 % (Dynamic load change 10 % … 90 %, (10 Hz)) |
|
< 0.25 % (change in input voltage ±10 %) |
Residual ripple |
< 30 mVPP (with nominal values) |
Output power |
120 W |
Typical response time |
300 ms (from SLEEP MODE) |
Maximum power dissipation in no-load condition |
< 3 W (120 V AC) |
|
< 3 W (230 V AC) |
Power loss nominal load max. |
< 17 W (120 V AC) |
|
< 16 W (230 V AC) |
Đánh giá
Chưa có đánh giá nào.