IZM-G1

Mô tả

Connections and nominal size:
FG flange DN 25, 40, 50, 65, 80, 100, 125, 150
Tube fitting DIN 11 851 DN 10, 15, 25, 32, 50, 65, 80
Clamp ½” (connections 1″), 1½”, 2″, 3″
(connections 4″)
Materials:
Measuring pipe: Material-no.: 1.4301
Liner: PTFE
Electrodes: Material-no.: 1.4404
Transmitter housing: Material-no.: 1.4301 (blasted)
Connection housing: Cast aluminium (with special corrosion-proof varnish)
Electrical connection:
Coil supply to transmitter: 2 x 0,75 mm², shielded
Electrode signal from transmitter: 3 x 1,5 mm² CY, shielded
Typical standard cable length: 5 m each (separated design)
Coil resistance: 100 Ohms
Calibration data in MEMbox to be plugged into converter
Product temperature: 150°C max. / integrated design 120°C
Cleaning temperature 150°C max. / integrated design 130°C
Product conductivity: 5µS/cm min.
Admissible pressure: 0.5 bar min. abs. at 20°C, 10 bar max. (higher pressures on demand)
Flow velocities: 0,03 – 10 m/s